Is There a Way to Refill a Hole in Wood and Use It Again
Have you ever gotten really excited near a pallet upcycle projection, only to realize that there are giant holes in the boards from the nails? Well that totally happened to me!
While working on my own pallet upcycle project (I turned it into a bath shelf! ), I realized that some pallets are nicer than others. The pallet I used was really well constructed and fabricated of proficient solid wood, but after I had taken information technology apart I realized that the nails had left giant holes in the slats of wood! Bummer.
Only my dad came to rescue with an awesome toothpick flim-flam he uses all the time in his woodworking business. So next time you use reclaimed wood, your projection won't be ruined past nasty nail holes before you even get-go!
Yous tin can run into from the picture above that all three boards had holes in them from the nails. And in 2 of the boards, the nails were driven so far in that the heads of the nails left holes besides! Yikes.
How To Fix Holes In Pallet Wood
At that place are a bunch of ways to fill a hole in a piece of woods, but this way fills the hole completely with real wood instead of glue so that it can be stained later. You can utilise woods glue to fill a hole, except wood mucilage won't concord a stain. So unless you're planning to paint the forest rather than stain it, that won't work.
Luckily, toothpicks will practise the trick! Here'due south what y'all demand:
- woods glue
- a skinny piece of wood (toothpicks, skewers, or caramel apple sticks piece of work smashing)
- a cheap pencil sharpener
- a saw
- a hammer
- sandpaper
- a rag to wipe upwardly extra glue
1. Find a skinny piece of woods
You desire a skinny piece of wood just slightly bigger effectually than the hole you lot are filling. This volition assist make sure that when you wedge the wood in, it volition fill the hole completely. We had a bunch of extra caramel apple tree sticks from making caramel apples, so those worked perfectly. A toothpick, or package of toothpicks will likewise work. So volition wooden skewers. Or take-out chopsticks. Anything wooden and skinny. 🙂
2. File the wood to a point
Employ a cheap pencil sharpener to file the woods to a signal. Pencil sharpeners aren't really designed for hard woods, so brand sure it's a inexpensive 1 just in instance you dull the blade or something.
iii. Fill the hole with wood glue, then hammer in the pointy end of the stick
Extra glue volition spill out of the hole, just but keep hammering. You want to wedge the stick equally far in as possible and then that the pigsty is completely filled upwards to all edges.
four. Wipe abroad the excess gum immediately
Since woods mucilage doesn't hold a stain you want to wipe upward whatsoever extra gum immediately. Just use a damp rag and wipe the entire area down. Yous can see in the photo above the slightly yellow spot around the caramel apple stick; that is simply slightly moisture woods from where I wiped away the extra glue. If you miss any extra glue yous can always sand it downwards afterward earlier you lot stain or paint, but information technology's easiest to wipe it away at this signal before it dries.
5. Once the glue is dry, cut the stick off affluent
Utilise a saw to cut the stick off flush with the top of the piece of wood. Don't worry about cutting it perfectly, yous can ever sand downwardly whatsoever extra stick that remains.
You can run across above that I cutting a piffling besides shut to the board and really nicked information technology with my saw blade. Just after I took this photo I sanded it downwardly and it ended upwardly okay 🙂 UPDATE: In example you missed it in the comments, my dad says that you lot tin prevent these saw marks past putting downwardly two or more layers of masking record around the plug earlier cutting information technology off. Cheers Dad!
And that's it; y'all're done! Now you lot have a dainty hole-complimentary piece of wood fix for painting or staining or whatever. And if y'all need the holes filled on both sides, just flip the lath over and do the same matter from the other side!
This is also a super useful tip if you strip a pigsty when you're screwing something together. If your drill keeps turning and turning just the screw isn't tightening down, that ways you've probably stripped the threads of your hole. Merely go some wood glue and a toothpick or two and make full the pigsty the same manner. Once the glue is dry out yous'll be able to sink a screw into the same spot and the screw will grab the wood of the toothpicks with no trouble!
Practice yous have whatsoever quick tips for fixing up reclaimed forest? I definitely had to mucilage a bunch of splintered pieces back together as well as fill all these holes. I'll show you the whole project on Monday, but for now, just know that woods glue is the all-time!
I link up at these crawly parties!
This post may contain affiliate links to the products I use and recommend for your convenience. Your price won't change, just these links will share a modest committee that assists in the maintenance of this site.
You lot May Also Like
Dear crafts & DIY?
Get free creative inspiration by email
Join the Practically Functional Marker's Club email newsletter and get crafts, DIY projects, Cricut tutorials, and other inspiration in your inbox in one case a week for free!
Source: https://www.practicallyfunctional.com/fix-holes-in-reclaimed-wood/
Post a Comment for "Is There a Way to Refill a Hole in Wood and Use It Again"